Polyhydron Throttle cum check valve, Non-pressure compensated, Modular construction, Can be used for Meter-out or Meter-in applications, Operating pressure 315 Bar for all ports, Nominal flow handling capacity 35 LPM, Fluid temperature range (-)10°C to 80°C, Viscosity range 10 cST to 380 cST, Throttle/check facility on port A, Size 6 mm. Warranty-As per Manufacturer's warranty policy.

Learn More

Flutec valves are designed to provide simple and accurate control of hydraulic fluids, By incresing number of turning of the control knob, starting from the closed position the flow increases evenly, Without check valve, Size 1/8". Warranty-As Per Manufacturer's Warranty Policy. Minimum Order Quantity-2.

Learn More

Kirloskar Swing Type Foot Valve, Rigid and Sturdy design with minimum loss of head across the valve, Perfectly flat seating surface for good seating, Preventing entry of foreign body to pump through suction pipe, Long service life, Size 50 mm. Warranty-As per Manufacturer's warranty policy.

Learn More

RMCO Cast Iron Diaphragm type Angular Valve, These flexible diaphragm of the valve in the open position completes the stream line passage formed principally by the body, Closure is effected by depressing the diaphragm until contact is made with the weir, Further compression of the resilient material makes the closer sure, The diaphragm completely isolates the body with its fluid passage from the bonnet and prevent to damaging the mechanism because this isolations of the valve does not require a spindle gland, After long usage or to suit different services, Size 25 mm. Warranty-As per Manufacturer's warranty policy.

Learn More

Yuken Flow Control one way restrictor, This valve is used to regulate an actuator speed in a circuit where line pressure is almost steady and small fluctuation of oil flow due to pressure changes is permitted, Integrated check valve allows reverse free flow from outlet to inlet port, Threaded connection, Size 3 mm, Operating pressure 250 Bar, Flow 30 LPM. Warranty-As per Manufacturer's warranty policy.

Learn More

Yuken Flow Control one way restrictor, This valve is used to regulate an actuator speed in a circuit where line pressure is almost steady and small fluctuation of oil flow due to pressure changes is permitted, Integrated check valve allows reverse free flow from outlet to inlet port, Threaded connection, Size 6 mm, Operating pressure 250 Bar, Flow 85 LPM. Warranty-As per Manufacturer's warranty policy.

Learn More

Product : SBM Bronze Globe Valve No. 4 Type of Pattern : Medium Duty Product Description : Screwed in Bonnet inside screw non rising stem End Details : Screwed female BSP threads to BS-21 Body Material Cum Standard : GM IS 318 Gr. LTB 2 Trim : Cu-Alloy Test Pressure : Body 300 Psig. Hyd. Seat T.P : 200 Psig. Size : 1/4" Warranty-As per Manufacturer's warranty policy. Pack Of-1 Minimum Order Quantity-6.

Learn More

Product : Sant Forged Brass Ball Valve Pressure/Class/Rating : PN-25 Type of Pattern : Standard Pattern Product Description : Two Piece design Lever operated End Details : Screwed female threads Body Material Cum Standard : Forged Brass IS 6912 Gr. FLB Type of Seat : Renewable PTFE Seat Type of Disc : Brass Trim : Machined Brass Test Pressure : Body 40 kg/cmｲ Hyd. Size : 3/8" Warranty-As per Manufacturer's warranty policy. Pack Of-1. Minimum Order Quantity-3.

Learn More

Polyhydron Flow divider valve, Flow dividers valve provide dual flow from a single source at a predetermined ratio, regardless of load, Maximum dividing error is ?±5%, Threaded port body, Pressure compensated spool type construction, Horizontal mounting position, Operating Pressure 315 Bar, Fluid medium is mineral oil, Fluid temperature range (-)20°C to 70°C, Flow 10 LPM. Warranty-As per Manufacturer's warranty policy.

Learn More

Polyhydron Flow divider valve, Flow dividers valve provide dual flow from a single source at a predetermined ratio, regardless of load, Maximum dividing error is ?±5%, Threaded port body, Pressure compensated spool type construction, Horizontal mounting position, Operating Pressure 315 Bar, Fluid medium is mineral oil, Fluid temperature range (-)20°C to 70°C, Flow 18 LPM. Warranty-As per Manufacturer's warranty policy.

Learn More