Flutec Non return Valve, Metal to metal sealing, Prevents flow in reverse direction, Suitable for high pressure application for all types of flow media(Oil,Water,Air,Gas), Maximum Operating Pressure 1000 Bar, Size 1/4", Flow 20 LPM. Warranty-As per Manufacturer's warranty Policy. Minimum Order Quantity-3.

Learn More

Kirloskar Swing Check Non Return Valve, Swing check type, Double flanged/Butt weld end, Bolted Cover design, Rigid and sturdy design with long service life, Size 50 mm. Warranty-As per Manufacturer's warranty policy.

Learn More

Polyhydron Shuttle Valve, Seal type construction, Automatically connects its P ports to either A or B depending upon whichever of two ports is at high pressure level, Isolates port A and port B from each other, port P can be connected to tank only if port A and port B are connected to tank, Operating Pressure 315 bar, Hydraulic medium is mineral oil, Sub-Plate type mounting, Size 6 mm, Flow upto 30 LPM, Fluid temperature range from (-)10°C to 80°C, Viscosity 68 cST, Port Connection G1/4. Warranty-As per Manufacturer's warranty policy.

Learn More

RMCO Non Return(Reflux) Valve, Cover and Door are of Cast Iron, Door fitted with G. M. face closing on corresponding G. M. Face in Body and the two door suspension lugs hinged on a long brass spindle supported in trunion bearing in both side of body, Size 65 mm. Warranty-As per Manufacturer's warranty policy.

Learn More

Rexroth Directional Control Valve, 4/3-, 4/2- or 3/2-way version, High-power solenoid Porting pattern according to ISO 4401, Wet-pin AC solenoids with detachable coil, Coil can be changed without having to open the pressure-tight chamber, Size 10 mm, Operating Pressure 315 Bar, Flow 120 LPM, 24 VDC Voltage type. Warranty-As per Manufacturer's warranty policy.

Learn More

Product : SBM Bronze Horizontal Lift Check Valve No. 4 Type of Pattern : Standard Pattern Product Description : Screwed in Cover End Details : Screwed female BSP threads to BS-21 Body Material Cum Standard : GM IS 318 Gr. LTB 2 Trim : Cu-Alloy Test Pressure : Body 300 Psig. Hyd. Seat T.P : 200 Psig. Size : 3/8" Warranty-As per Manufacturer's warranty policy. Pack Of-1. Minimum Order Quantity-4.

Learn More

Polyhydron Rotary Directional Control Valve, It is used for high pressure application at low flow, Threaded connection, Hydraulic medium is mineral oil, Operating pressure at port P,A & B is 700 Bar and at port T is 115 Bar, Fluid temperature range (-)20°C to 70°C, Viscosity range 10 cST to 380 cST, Hand pump mouting type. Warranty-As per Manufacturer's warranty policy.

Learn More

Polyhydron Rotary Directional Control Valve, It is used for high pressure application at low flow, Threaded connection, Hydraulic medium is mineral oil, Operating pressure at port P,A & B is 700 Bar, Fluid temperature range (-)20°C to 70°C, Viscosity range 10 cST to 380 cST, Hand pump mouting with pipe fitting. Warranty-As per Manufacturer's warranty policy.

Learn More

Polyhydron Rotary Directional Control Valve, It is used for high pressure application at low flow, Sub-Plate mounting, Hydraulic medium is mineral oil, Operating pressure at port P,A & B is 700 Bar, Fluid temperature range (-)20°C to 70°C, Viscosity range 10 cST to 380 cST, Detended type. Warranty-As per Manufacturer's warranty policy.

Learn More

Polyhydron Rotary Directional Control Valve, It is used for high pressure application at low flow, Threaded connection, Hydraulic medium is mineral oil, Operating pressure at port P,A & B is 700 Bar, Fluid temperature range (-)20°C to 70°C, Viscosity range 10 cST to 380 cST, Detended type. Warranty-As per Manufacturer's warranty policy.

Learn More