Electrical Performance:- • Output Ratings (0 °C to 40 °C): 0 to +30 V, 0 to 5 A • Line and Load Regulation: CV: <0.01% +2 mV, CC: <0.02% +2 mA • Ripple and Noise (25 °C ±5 °C): CV: 12 mVp-p, <1 mVrms; CC: 3 mArms • Load Transient Response Time (within 15 mV from full load to half load and from half load to full load): <50μs • Programming Accuracy (25 °C ±5 °C): <0.35% +20 mV, <0.35% +20 mA • Readback Accuracy (25 °C ±5 ° C): <0.35% +20 mV, <0.35% +20 mA • Meter Resolution: Voltage: 10 mV, Current: 10 mA • Maximum Output Float Voltage: ±240 Vdc Protection Features:- • Over Voltage Protection Accuracy ± (% of output + offset): <0.5% +0.5 V • Over Voltage Protection Programmable Range: 1 V to 33 V • Over Current Protection Accuracy ± (% of output + offset): <0.5% +0.5 A • Over Current Protection Programmable Range 1 A to 5.5 A • AC Power Input Specifications • Input Power Option (selectable): 100 Vac ± 10%, 47 to 63 Hz 115 Vac ± 10%, 47 to 63 Hz 230 Vac ± 10%, 47 to 63 Hz • Maximum Input Power: 500 VA • Fuse: External, customer assessable Physical Specifications:- • Dimensions (H x W x L) 88.1 mm x 212.3 mm x 394.3 mm

Learn More

•The U2B series of force transducers is suitable for measuring tensile forces and pressures. They measure static and dynamic forces with great accuracy. •The U2B force transducers are manufactured from stainless steel and are suitable for use under harsh environmental conditions and severe operating constraints. They are maintenance free and can even be installed in places that are hard to reach. Their measuring signals can be transmitted to remote measuring equipment. •Force transducers made from stainless materials Tensile / compressive force transducers High accuracy even with sideloads thanks to integrated lateral force compensation Robust thanks to ability to accept high levels of sustained dynamic loading Low overall height Axial displacement < 0,1mm Very safe to operate, even in adverse conditions Max. operating force: 150% Nominal temperature range: -10 ... +70°C IP67 (IP68) protection Stainless steel Direction of force: tensile/compressive Nominal forces: 0.5kN, 1kN, 5kN, 10kN, 20kN, 50kN, 100kN, 50kN, 100kN, 200kN. •Nominal sensitivity: 2 mV/V

Learn More

Technical Specifications :- • Part no.- 060-H032-02, • Model- JEC-AG • Spring Rate- 2 oz/in, •Spring Force @ Center- 4 oz/in • Non-linearity ±0.25 %FS max. • Amplifed/Unamplified- Amplified • Isolation- 1000 V input to output • Probe Material- Stainless steel • Case Material- Stainless steel • Operating Temperature: -50 °C to 80 °C • Power Supply (Single)- 24 Vdc to 40 Vdc @ 30 mA • Power Supply (Dual): ±12 Vdc to ±20 Vdc @ 30 mA • Polarity- Output is positive for outward stroke • Reverse Polarity Protection- Yes • Probe Thread- Not applicable • Output Load- 2000 ohm with three-wire supply - 20000 ohm with floating supply • Product Dimensions- Ø20,57 mm x 209,6 mm L [Ø0.81 in x 8.25 in L] • Output Sensitivity: ±5 Vdc or 0 Vdc to 10 Vdc (field selectable) • Element Type: dc-dc type displacement transducer • Armature Type- Captive guided spring return • Temperature Effect (Zero)- 0.006 %FS/°F max. • Temperature Effect (Span)- 0.017 %FS/°F max.

Learn More

Specification:- •Product Code: DR1 •Inlet Connection: G1 1/2" •Outlet Connection: G1 1/2" •Maximum Working Pressure - bar : 69 •Maximum Working Pressure - psig: 1000 •Outlet Pressure Range - bar: 0 to 69 •Outlet Pressure Range - psi: 0 to 1000 •Set pressure range bar: 0 to 69 •Set pressure range psi: 0 to 1000 •Nominal bore - mm: 25 •Medium: Inert Liquid

Learn More