By pressing the‚¬Å“HOLD‚¬ key, the currently displayed measurement value can be held and‚¬Å“HOLD‚¬ is simultaneously displayed.
By pressing and holding PEAK and then pressing AUTO/MAN key, the zero correction is made and relative Value is measured.It is not active in Hz/Duty functions.Hold measurement. Relative measurement. Duty cycle (%) measurement.
Temperature measurement with K type Thermocouple. Peak value measurement Dual Display: The dual display included a main display and a sub display. Main display always display current measurement value where as sub display shows some special measurements like maximum/minimum value, reference value for relative value measurement. Also dual display is used to display at the same time Voltage/Current with Frequency, Frequency with Duty cycle etc. Peak Hold: Minimum and maximum Peak values are hold in VAC, mAAC,AAC. MIN/MAX Function: By pressing min/max button instrument will start recording minimum and maximum readings.All functions can measure MIN/MAX except Hz/Duty functions.This provides for the testing of the polarity of diodes, as well as inspection for short -circuits and circuit interruptions. In addition to the display, resistance of less than 30 ?(approx.) Are Indicated with an acoustic signal.LCD display field 58 mm X 31.4 mm with digital display, ,alalog scale and with display of measurement unit, and Various special functions..Digital Display : 7 Segment.Character height : Main Display Character : 12mm, Sub Display Character : 7mm.